全站搜索
产品搜索
 
 
产品详情
JDY-10M BL Mesh Networks Module User Manua

 

Product introduction
   The JDY-10 transparent transmission module is based on the Bluetooth 4 protocol standard, the working frequency range is 2.4GHZ, the modulation mode is GFSK, the maximum transmit power is 8dB, and the maximum transmitting distance is 50 meters. It has the characteristics of low power consumption, small size, strong signal and stable data transmission, etc.

Product features
1:Support Android and IOS mobile data transmission.
2:Support one-to-multiple, multiple to one, and multiple to multiple data transmission and control.
3:Support mesh networks LED lights (26 profiles and panel modes), brightness, white light, adjustable speed.
4:Support mesh networks GPIO control (one-to-multiple, multiple to one, and multiple to multiple).
5:It can be certified by FCC/CE.
6:Support mesh networks remote control (ultra low power consumption), two batteries can use at least one year.
7:Support mesh networks 4 PWM control.
8:Maximum mesh networks number 255.
9:Support broadcast and unicast MESH to send data.
10:Support BLE master-slave working at the same time without a master and slave switching.

Product Application Range
1:Bluetooth mesh networks LED lights (one-to-multiple, multiple to one, cell phone or remote control, and multiple to multiple control)
2:Application of motor control in Bluetooth mesh networks (one-to-multiple, multiple to one, cell phone or remote control, and multiple to multiple control).
3:Mesh networks panel switch, 86 switch (ultra-low power consumption)
4:Mesh networks intelligent home application control(switches, relays, and curtains).
5:Application of mesh networks sensor.
6:Application of WIFI mesh networks gateway.
7:Application of Zigbee mesh networks.
8:Application of mobile phone mesh networks control.

 

 

Technical specifications

Type

Specification parameter

working voltage

1.9 – 3.6V

working temperature

-40 - 85°C

max transmit power

+8dbm

antenna

PCB board antenna

receiving sensitivity

-92dbm

SMT welding temperature

<260

communication interface

UART

average current

Mesh mode

28MA

Deep Sleep mode

5 uA

 

Factory default configuration

Sequence

Function

Parameters

AT instruction

1

Baud rate

115200

AT+BAUD0

2

Module short

address

1 byte after the MAC address

 

3

Mesh networks ID no.

123456789ABC

AT+NETIDC0C1C2C3C4C5

4

K1 target short address

FF

AT+KVALUE01FF

5

K2 target short address

FF

AT+KVALUE01FF

6

K3 target short address

FF

AT+KVALUE01FF

7

K4 target short address

FF

AT+KVALUE01FF

8

K5 target short address

FFbroadcast

 

9

APP connection password switch

close

AT+ISCEN0

10

APP connection password

12345

AT+PSS12345

11

Broadcast name

JDY-10M

AT+NAMEJDY-10M

 

 
脚注信息
版权所有 Copyright(C)Since2017  深圳市筋斗云电子科技有限公司